-
Appelez maintenant ! +86-13912367818 -
Envoyer par courriel info@wxhlhg.com
The hydraulic straightening press uses a 350×250 H-beam steel frame and hydraulic systems to efficiently remove deformation from welded metal parts, ensuring precise straightening for heavy-duty fabrication.
The hydraulic straightening press is mainly welded by 350x250 hot-rolled H-shaped steel. The reverse side is equipped with a rotating cylinder, a cylinder-centering transmission chain, an anti-deformation compression cylinder, and a hydraulic pipeline.
| Tire clamp load | 30 tons |
| Forward and reverse flip angle | 0～±30° |
| The distance between the upper plane and the ground is | 1500mm |
| Anti-deformation compression and centering device | There are 10 sets on one side, with a spacing of 1600mm . The pressing head can move up and down 120mm. The pressing force istons per unit. The left and right movement distance of the centering device is 1100mm/900mmtonsper unit. |
| The tire clamp meets the plate unit width range of | 2300mm～4500mm/1800mm～3600mm |
French 
English 
German 
Japanese 
Russian 
Korean 
Indonesian 
